Rockwell Automation FactoryTalk Historian SE 3.01 Installation and Configuration Guide - Manual (Page 74)

Chapter 6 Configuring FactoryTalk Historian
74 Rockwell Automation Publication HSE-IN024A-EN-E–December 2012
For this FactoryTalk
Historian suite: Open these ports: Of this type:
Historian Server 5450
5454
5455
5456
5458 TCP
TCP
TCP
TCP
TCP
Live Data Interface 6000 TCP
• Allow FactoryTalk Historian Live Data Interface to
communicate through the firewall:
See the table below to learn which settings you need to use
when configuring the firewall.
Item Description
The absolute path to
the Live Data
interface
Interfaces\LDInterface\FTLDInt.exe,
where is the path specified in the
following registry key:
Computer > HKEY_LOCAL_MACHINE > Software >
Wow6432Node > PISystem
The name (ID) of the
Live Data interface PIUniint Interface to the PI System.
Network location
types
Private and public.
To check the location of the Live Data interface:
1. Open the Windows Registry Editor.
2. Go to
Computer > HKEY_LOCAL_MACHINE >
Software > Wow6432Node > PISystem.
3. Double-click the PIHOME value and copy the path from
the value data text box.
The complete path to the Live Data Interface will consist of
the following parts:
• The path you get from the registry.
• \Interfaces\LDInterface\FTLDInt.exe