Configure time slave chassis - end node – Rockwell Automation 1756-SYNCH ControlLogix SynchLink Module User Manual User Manual

Page 89

Publication 1756-UM521C-EN-P - July 2004

Configuring the Star Configuration B-13

Configure Time Slave Chassis - End Node

You must complete the following tasks to configure the second CST Time
Slave chassis. This set of tasks is exactly the same as those described on
page B-8 for the first End Node but are repeated here.

• Create a New RSLogix 5000 Project
• Add a SynchLink Module
• Configure the SynchLink Module

– Name the module
– Choose a receive communications format
– Choose a transmit communications format
– Choose an electronic keying option
– Set the RPI
– Set the module as the CST Time Master for the chassis

• Create Axis Data Tags
• Download Configuration

Create a New RSLogix 5000 Project

1. Use the File menu to create a new project.

2. Name the controller.

Time Slave

Chassis

ControlNet

SynchLink

Hub

Choose a New project
from the File menu.

F. Click here to use the

new controller.

A. The controller is a 1756-L1.

B. The controller is named

Time_Slave_End_Node_2.

C. The controller is used in a

7-slot chassis.

D. The controller’s slot location

is 0.