Rockwell Automation 1756-SYNCH ControlLogix SynchLink Module User Manual - Manual (Page 130)

Publication 1756-UM521C-EN-P - July 2004
E-4 Software Configuration Tags
Local.x.I.SynchLinkCSTFault BOOL 0 = Valid CST data received from upstream module or CST data not required
1 = This module configured to relay CST from SynchLink to Chassis and valid
CST data not received from upstream module
Local.x.I.SynchLinkCSTUnsynch BOOL 0 = The module’s CST value is either synchronized with the rest of the system
or is configured so that synchronization is not required.
1 = The module is configured to synchronize its CST value with the rest of the
system but the synchronization has not occurred.
Local.x.I.SynchLinkMultiplierOverflow BOOL This field only shows a value if the result of Multiplier (i.e.
Local.x.O.Multiplier) exceeds 16 bits. This value here is the excess over 16
bits of data.
Local.x.I.RxAxis0Fault BOOL 0 = The module’s receive port is either receiving Axis0 data or is not
configured to receive such data.
1 = This module is configured to transmit Axis0 data but is not receiving Axis0
data from local processor
Local.x.I.RxAxis1Fault BOOL 0 = The module’s receive port is either receiving Axis1 data or is not
configured to receive such data.
1 = This module is configured to transmit Axis1 data but is not receiving Axis0
data from local processor
Local.x.I.Axis0NoConsumer BOOL 0 = Another device is consuming the Axis0 data this module is producing or
this module is not configured to produce Axis0 data.
1 = No device is configured to consume the Axis0 data this module produces.
Local.x.I.Axis1NoConsumer BOOL 0 = Another device is consuming the Axis1 data this module is producing or
this module is not configured to produce Axis1 data.
1 = No device is configured to consume the Axis1 data this module produces.
Local.x.I.TxAxis0Fault BOOL 0 = The module’s transmit port is transmitting Axis0 data or is not configured
to transmit such data.
1 = The module is configured to transmit Axis0 data but is experiencing a
fault on that port.
Table E.2 Input Data Tags
Name
(x = module’s chassis slot location):
Type: Definition: