Rockwell Automation 1756-SYNCH ControlLogix SynchLink Module User Manual - Manual (Page 61)

Publication 1756-UM521C-EN-P - July 2004
Configuring the SynchLink Module 5-9
Changing Configuration
After Module Operation
Has Begun You change configuration for your SynchLink module after operation has
begun, but you must go offline first. Follow these steps to change the
SynchLink module configuration:
1. Go offline.
2. Access the module properties in RSLogix 5000.
A. Click on the triangle to see
the pull-down menu.
B. Click on Go Offline.
A. Right-click on the module
to see the pull-down menu.
B. Click on Properties.