Rockwell Automation 1756-SYNCH ControlLogix SynchLink Module User Manual - Manual (Page 88)

Publication 1756-UM521C-EN-P - July 2004
B-12 Configuring the Star Configuration
2. Create a new tag for Axis 1. The tag should look like the example below.
Download Configuration
Download the configuration data.
RSLogix 5000 verifies the download process with this pop-up screen.
This completes the download process.
A. Name the new tag.
B. Change the Tag Type
to Consumed.
C. Use the pull-down menu
to change the Producer to
the SynchLink module in
the local chassis.
D. Type in the Remote Tag
Name. This name must
either be Axis0 or Axis1.
IMPORTANT: If you use any
other Remote Tag Name
(other than Axis0 or Axis1)
the remote axis data will
NOT be consumed.
E. Change the Data Type to Axis.
F. Click on OK to create the new tag.
Pull down this menu and click
here to download the new data
Click here to download new