Rockwell Automation 1756-SYNCH ControlLogix SynchLink Module User Manual - Manual (Page 115)

Publication 1756-UM521C-EN-P - July 2004
Configuring the Ring Configuration D-5
Click here to move to the next page
The Module Identification page
is blank during initial
Click here to move to the next page
The module transmits 2 Direct
Words, as specified in the transmit
port communications format.
The module is configured as the Time
Master for:
• the chassis - optional
• the SynchLink - required
IMPORTANT: In this configuration,
the SynchLink module must be the
Time Master of the SynchLink, but it
is not required to be the Time Master
of the chassis. If the module is not
the Time Master of the chassis, it
receives the CST timer value from the
chassis backplane.
Click here to finish configuration.