Rockwell Automation 1791DS-IBxxxx Guard I/O DeviceNet Safety Modules - Manual (Page 97)

Rockwell Automation Publication 1791DS-UM001J-EN-P - May 2013 97
Configure Modules in RSNetWorx for DeviceNet Software Chapter 6
Combined Status - Muting ·A single BOOL tag represents an AND of the status bits for all the
input points. For example, if any input channel has a fault, this bit
goes LO.
(1)
·A single BOOL tag represents an AND of the status bits for all the
output points.
·A muting status tag for test output T3, T7, T11, and T15.
Pt. Status-Muting-Test Output ·Status tags for each of the input and output points.
·Muting status tag for test output T3, T7, T11, and T15.
·Status tags for each of the test outputs.
(1) When using combined status, use explicit messaging to read individual point status for diagnostic purposes.
Choose Description