Rockwell Automation 193-EC4 EC4 Current Monitoring Relay User Manual - Manual (Page 142)

Rockwell Automation Publication 193-UM011A-EN-P - September 2010 143
DeviceNet Information Appendix B
The following common services are implemented for the Control Supervisor
Object:
Acknowledge Handler
Object – 0x2B The following class attributes are supported for the Acknowledge Handler
Object:
A single instance (instance 1) of the Acknowledge Handler Object is supported.
The following instance attributes are supported:
126 Get/Set Trip Reset BOOL 0->1 = Trip Reset
otherwise no action
130 Get/Set Reset Mode BOOL 0 = Manual
1 = Automatic
131 Get/Set OL Reset Level USINT %FLA
132 Get/Set Clear Queues BOOL 0->1 = Clear fault and warning queues, start
counters and operating hour accumulators
otherwise no action
177 Get/Set IN1 Assignment USINT 0 = Normal
1 = Trip Reset
2 = Remote Trip
3 = 2 Speed
178 Get/Set IN2 Assignment USINT 0 = Normal
1 = Trip Reset
2 = Remote Trip
3 = 2 Speed
179 Get/Set IN3 Assignment USINT 0 = Normal
1 = Trip Reset
2 = Remote Trip
3 = 2 Speed
180 Get/Set IN4 Assignment USINT 0 = Normal
1 = Trip Reset
2 = Remote Trip
3 = 2 Speed
Table 59 - Control Supervisor Object Common Services
Service
Code Implemented for: Service
Name
Class Instance
0x0E Yes Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single
0x05 No Yes Reset
Table 58 - Control Supervisor Object Instance Attributes
Attribute
ID Access
Rule Name Data
Type Value
Table 60 - Acknowledge Handler Object Class Attributes
Attribute ID Access Rule Name Data Type Value
1 Get Revision UINT 1