Rockwell Automation 193-EC4 EC4 Current Monitoring Relay User Manual - Manual (Page 139)

140 Rockwell Automation Publication 193-UM011A-EN-P - September 2010
Appendix B DeviceNet Information
The following common services are implemented for the Parameter Group
Object:
Control Supervisor Object –
Class Code 0x29 The following class attributes are supported for the Control Supervisor Object:
The following instance attributes are supported for the Control Supervisor
Object.
9 Get
7
th
Parameter No.
UINT 71 OutB Pr FltState
10 Get 8 th Parameter No. UINT 72 OutB Pr FltValue
11 Get
9
th
Parameter No.
UINT 73 OutB Dn FltState
12 Get
10
th
Parameter
No.
UINT 74 OutB Dn IdlValue
13 Get 11 th Parameter
No.
UINT 75 OutB Dn IdlState
14 Get
12
th
Parameter
No.
UINT 76 OutB Dn IdlValue
Table 55 - Parameter Group Object Instance 7 – DeviceLogix Parameters
Attribute
ID Access
Rule Name Data Type Value Parameter Name
1 Get Group Name
String SHORT_STRIN
G “DeviceLogix”
2 Get Number of
Members UINT 4
3 Get
1 st Parameter No.
BOOL 79 Comm Override
4 Get
2
nd
Parameter No.
BOOL 80 Network Override
5 Get
3
rd
Parameter No.
UINT 81 Net Outputs
6 Get 4 th Parameter No. UINT 82 Net Out COS Mask
Table 56 - Parameter Group Object Common Services
Service
Code Implemented for: Service
Name
Class Instance
0x0E Yes Yes Get_Attribute_Single
Table 54 - Parameter Group Object Instance 6 – Output Setup Parameters
Attribute
ID Access
Rule Name Data Type Value Parameter Name
Table 57 - Control Supervisor Object Class Attributes
Attribute ID Access Rule Name Data Type Value
1 Get Revision UINT 1