Rockwell Automation 21G PowerFlex 750-Series AC Drives - Manual (Page 38)

38 Rockwell Automation Publication 750-IN001N-EN-P - April 2014
PowerFlex 750-Series AC Drives
Install Floor Mount Drive with Power Options Bay and Wiring Bay
Frame 9 drives configured with both the power options bay and wiring bay ship
in two sections. The following procedure describes how to join the wiring bay to
the power options bay.
1. Remove external wrapping, bus bar cover, and locate joining hardware.
Joining hardware is shipped with the wiring bay.
Position the Drive Cabinets and Power Options Bay
2. Release the factory-assembled drive cabinets and power options bay from
the shipping skid.
Description Quantity Description Quantity
M8 x 16 mm Cabinet Joining Screw 20 M10 Nut with Washer 12
M10 x 45 mm Carriage Bolt 12 M6 x 40 mm bolts 4
Bus Bar Clamp Plate 12 M6 Flange Nuts 4
M8 x 16 13 mm
Drive Cabinets
Power Options Bay
IP54, NEMA 12 Enclosure Rating Shown