Universal feedback option module - 755 drives only – Rockwell Automation 21G PowerFlex 750-Series AC Drives User Manual
Page 262

262
Rockwell Automation Publication 750-IN001N-EN-P - April 2014
PowerFlex 750-Series AC Drives
Universal Feedback Option Module - 755 Drives Only
Table 91 - Universal Feedback Option Module LED Indication
Table 92 - Universal Feedback Option Module DIP Switch Settings - Safety Application
20-750-UFB-1
LED
Name
Color
State
Description
➊
Board
Unlit
Off
Not powered.
Green
Flashing
Initializing, not active.
Communication lost, attempting to reconnect.
Steady
Operational, no faults are present.
Red
Flashing
Module error.
• Check P1 [Module Sts]
Steady
Normal operation.
Module is booting.
Fatal module error.
• Cycle power
• Flash update module firmware
• Replace module
Yellow
Flashing
A type 2 alarm condition exists.
• Check P1 [Module Sts]
Steady
A type 1 alarm condition exists.
• Check P1 [Module Sts]
Yellow /
Green
Flashing
Alternately
Module is flash updating.
➋
DPI
Unlit
Off
Not powered. Not communicating.
Green
Flashing
Module is attempting to communicate with the DPI host.
Steady
• Properly connected and communicating.
• Module is flash updating.
Red
Flashing
Module is not communicating with the DPI host.
Steady
DPI communication failure such as invalid port.
Yellow
Flashing
Normal operation.
Steady
Peripheral is connected to a SCANport product and does
not support a SCANport compatibility mode.
Safety Channel Selection
DIP Switch Settings
(1)
(1) DIP switches only function when safety channels are used.
Primary Safety Channel
To connect feedback signals to the Primary Safety Channel, set:
S1 sliders to ON
S2 sliders to OFF
S3 slider to ON
Secondary Safety Channel
To connect feedback signals to the Secondary Safety Channel, set:
S1 sliders to OFF
S2 sliders to ON
S3 slider to ON
Primary and Secondary Safety Channels
To connect feedback signals to both the Primary and Secondary Safety Channels, set:
S1 sliders to ON
S2 sliders to ON
S3 slider to ON
➊
➋
S1 S2 S3
S1 S2 S3
S1 S2 S3