RKI Instruments EAGLE 2 Manual User Manual
Page 91
EAGLE 2 Operator’s Manual
Replacing a Sensor • 81
5. Lay the top case down next to the bottom case to allow access to the flow
system.
6. Locate the sensor you want to replace and remove it from the flow
chamber.
Figure 22: Replacing a Sensor
7. To remove the LEL sensor, do the following:
•
Unscrew and remove the two screws that hold down the LEL sensor
bracket.
•
Grasp the LEL sensor connector and gently pull it up until it either
disengages from the LEL sensor or the LEL sensor comes out of the
flow chamber with the connector.
•
If the sensor came out with the connector, remove the sensor from the
connector.
CO Sensor
Main PCB
Oxygen Connector
H2S Connector
Flow Block
Oxygen Sensor Bracket
Oxygen Sensor
LEL Sensor Bracket
LEL Sensor Cable
LEL Sensor
LEL Connector
CO Connector
H2S Sensor
- Eagle Series (89 pages)
- Eagle Series (66 pages)
- 01 Series Manual (33 pages)
- 01 Series Quik Start (2 pages)
- OX-94 (13 pages)
- FP-3 (16 pages)
- GasWatch 1 (18 pages)
- GasWatch 2 Manual (37 pages)
- GasWatch 2 Quik Start (2 pages)
- GP-01 (34 pages)
- GP-01 with self resetting alarms (33 pages)
- GP-204 (7 pages)
- NP-204 (13 pages)
- RI-215A (24 pages)
- SC-01 (45 pages)
- SC-01 (68 pages)
- Data Cal 2000 (88 pages)
- Eagle 2 Quik Start (2 pages)
- GX-94 (3 pages)
- GX-94 (52 pages)
- SDM-E2 (89 pages)
- SDM-E2 (224 pages)
- Eagle 1 Manual (89 pages)
- Eagle 1 Quik Start (2 pages)
- Inert Gas Testing Eagle with Two Pumps (66 pages)
- Gas Tracer (234 pages)
- Gas Tracer 10,000 ppm (120 pages)
- GX-2001 Manual (45 pages)
- GX-2001 Quik Start (2 pages)
- GX-2001 Canadian Version (43 pages)
- GX-2003 Manual (94 pages)
- GX-2003 Quik Start (2 pages)
- GX-2009 Manual (73 pages)
- GX-2009 Quik Start (2 pages)
- GX-2009 Supplement (2 pages)
- GX-2012 Manual (185 pages)
- GX-82 (22 pages)
- GX-82A (43 pages)
- GX-86 (22 pages)
- GX-86A (39 pages)
- GX-8000(PT0-098) (52 pages)
- GX-8000(H4-0050) (23 pages)
- RX-516 (36 pages)
- GX-2009 (2 pages)