RKI Instruments EAGLE 2 Manual - Manual (Page 185)

EAGLE 2 Operator’s Manual Configuring the PID Gas in Setup Mode • 175
12. Use AIR ▲ YES and RANGE ▼ SHIFT to place the cursor next to the
desired gas. In the example below, the cursor is placed next to
isopropanol (IPA).
Table 16: PID Gas Configurations
Gas Name (LCD Abbreviation)
Detection Range Full Scale
Low Range/High Range
Acetone (ACT) 30.00 ppm/1000 ppm
Benzene (BNZ 25.00 ppm/1000 ppm
Diesel Fuel No. 1 (DSL) 40.00 ppm/1500 ppm
Ethanol (ETA) 400.0 ppm/15000 ppm
Gasoline (GSL) 50.00 ppm/2000 ppm
Isobutylene (IBL)
Standard Factory Gas Configuration 50.00 ppm/2000 ppm
Isopropanol (IPA) 200.0 ppm/5000 ppm
JP-5 Fuel (JP5) 30.00 ppm/1000 ppm
Methyl Ethyl Ketone (MEK) 40.00 ppm/1500 ppm
Toluene (TOL) 25.00 ppm/1000 ppm
N-Hexane (HEX) 200.0 ppm/5000 ppm
Propylene (PRL) 50.00 ppm/2500 ppm
Styrene (STY) 20.00 ppm/500 ppm
Tetrachloroethylene (PCE) 30.00 ppm/1000 ppm
Trichloroethylene (TCE) 30.00 ppm/1000 ppm
Vinyl Chloride (VCM) 100.0 ppm/4000 ppm
PID (PID)
User Defined Gas Loaded with
Maintenance Program 50.0 ppm/2000 ppm
PID(0- 2000ppm IBL )
2000 ppm GSL
2000 ppm IBL
> 5000 ppm IPA
1000 ppm JP5