Rechargeable ni-mh batteries, Battery chargers – RKI Instruments EAGLE 2 Manual User Manual
Page 27

EAGLE 2 Operator’s Manual
Optional Accessories • 17
Rechargeable Ni-MH Batteries
Rechargeable Ni-MH batteries are available for the EAGLE 2. A fully
charged set of Ni-MH batteries will power the EAGLE 2 for 18 hours. The
batteries will last for a minimum of 500 charge cycles. See “General Parts
List” on page 84 for ordering information.
Battery Chargers
Three battery chargers are available for the EAGLE 2 to charge the optional
Ni-MH batteries, the standard AC charger, a DC charger with a vehicle plug
adapter, and an AC/DC charger with a vehicle plug adapter.
AC Charger
The standard AC charger consists of the charging module, which includes all
of the charging circuitry, and an AC adapter. The charging module includes a
five foot cable with a connector on the end that mates with the EAGLE 2
charging socket. The AC adapter plugs into a 115 VAC wall outlet and
connects to the charging module with a jack on the end of a five foot DC
output cable. The AC adapter will also work for 100 VAC or 220 VAC if an
appropriate plug adapter is provided. The AC charging station is shown
below in Figure 7.
Figure 7: EAGLE 2 AC Charger
AC Adapter
Charging Module