RKI Instruments EAGLE 2 Manual - Manual (Page 261)

EAGLE 2 Operator’s Manual Parts List • 251
16. Make sure that the top case gasket is fully seated in its groove and
carefully put the top case back on the bottom case. If you have any
difficulty mating the top and bottom cases, inspect the placement of the
main PCB and the placement of the top case gasket.
17. Turn the EAGLE 2 upside down and tighten the three case screws to
secure the top case to the bottom case.
18. Calibrate the infrared methane channel as described in “Infrared Methane
Calibration” on page 241.
Parts List
Table 29: Infrared CH
4
EAGLE 2 Parts List
Part Number Description
47-5051RK Infrared CH
4
sensor cable
DEM-3313-3 Infrared CH
4
sensor, 0-100 %LEL or 0-100 %LEL/5.0-100.0 %vol
autoranging
81-0012RK-01 Calibration cylinder, 50 %LEL CH
4
in air, 34 liter steel
81-0012RK-03 Calibration cylinder, 50 %LEL CH
4
in air, 103 liter steel
81-0013RK-01 Calibration cylinder, 50 %vol CH
4
in N
2
, 34 liter steel
81-0013RK-05 Calibration cylinder, 50 %vol CH
4
in N
2
, 58 liter steel