ACU-RITE MILLPWRG2 - Manual (Page 9)

ACU-RITE MILLPWR G2 ix
MILLPWR
G2
A
c
cess Code
MILLPWR
G2
Access Code
Access Code
Access to Machine Parameter Operations
The access code must be entered before the installation setup
parameters can be accessed or changed.
 Press the SETUP key to enter the Job Setup dialogue.
 Press the Config Data soft key, and enter the access
code in the yellow message bar.
Attention!
The parameter access code is 8891
Attention!
To prevent setup parameters from being changed, remove
this page from the manual after initial system setup.
Retain this information in a safe place for future use.