ACU-RITE MILLPWRG2 - Manual (Page 113)

ACU-RITE MILLPWR G2 95
6.2 F
o
lders
Loading a MILLPWR
G2
(MPT) Program
The Load soft key allows you to open programs in the folder listing.
The steps below explain how to load a program from MILLPWR
G2
User folder, a USB device, or from a network location.
 If a program is loaded, save the open program, it does not have to
be cleared.
 From the PGM screen, press the Program Functions soft key.
 When a program is not located in the current folder, select the
location of the MILLPWR
G2
program using the Folder View soft key,
and Change Window soft key as needed.
 Verify that MILLPWR Programs is selected in the Program Type
popup menu. Only MILLPWR
G2
programs stored in the selected
folder will be displayed, see "Program Type Filter" on page 68.
 Using the ARROW keys for navigation in the display window, highlight
the MILLPWR
G2
program to load.
 Press the Load soft key, and verify that the desired program is now
loaded.
When loading a program from a network, or a USB memory device,
first select the device from the Folders Tree, then follow the same
procedure as would be done from the MILLPWR
G2 User folder.
Program extensions:
MILLPWR
G2
programs have a .mpt extension.
G-code programs have a .G or .NC extension.
DXF files must have a .DXF extension.
Use Folder View for locating folders, and programs to
load.
It is recommended that all programs be copied to the local
MILLPWR
G2
User folder for usage.