ACU-RITE MILLPWRG2 - Manual (Page 133)

ACU-RITE MILLPWR G2 115
7.
1 Demonstr
ation Pr
ogr
am
Programming the lower vertical Line
Next, the line that starts vertical from the bottom line at the end of the
arc will be entered.
 Press the LINE key.
Again, MILLPWR
G2
assumes that the program is continuing from the
last step. So it has automatically filled in the FROM: X1, and Y1 fields,
the Z: fields, TOOL: fields, FEED: fields, and the OFFSET field.
Using the numerical keypad, enter the following information:
 In the TO: X2 field enter -3.0, and ARROW Down.
 In the TO: Y2 field enter -.838, and ARROW Down.
 Press the USE key.
Next, the lower angled line will be added.