ACU-RITE MILLPWRG2 - Manual (Page 87)

ACU-RITE MILLPWR G2 69
5.3 Cr
eating pr
ogr
ams o
v
erview
5.3 Creating programs overview
New Part Program
The following briefly describes how a new program is created. See
"Fundamentals for Creating a Program" on page 75 for more complete
information.
 Press the DRO/PGM key from DRO mode to enter PGM
mode.
 A new program can be created from an existing program, or create
a completely new program.
To create a new program from an existing program:
 Press the Program Functions soft key.
 Select an existing program that will be used to create
the new program, and press the Load soft key.
 Press the Program Functions soft key.
 Press the Save soft key. Press the Keyboard soft key
to display the keyboard if the keyboard is not
automatically displayed. Type in the name of the new
program and select Save.
 The new program is now loaded, and can be modified as required.
To create a new (blank) program:
 When a program is currently loaded, press the Clear
Program soft key in the PGM mode display to clear the
loaded program from memory, and to create a new
program.
 Press the Save soft key. Press the Keyboard soft key
to display the keyboard if the keyboard is not
automatically displayed. Type in the name of the new
program and select Save.