ACU-RITE MILLPWRG2 - Manual (Page 138)

120 7 Demonstration Program
7.
1 Demonstr
ation Pr
ogr
am
Tool Change for the Bolt hole Pattern
Begin first by changing the tool.
 Press the TOOL key. The tool form will open with the
cursor in the SIZE: DIAMETER field.
 Enter 0.25 in the SIZE: DIAMETER field using the numeric keypad.
 Press ARROW Down to highlight the TOOL TYPE field (the LENGTH
field will be left blank).
 In the TOOL TYPE field, press the Tool Types soft key to open the
TOOL TYPE drop down menu.
 ARROW down to highlight the DRILL.
 Press the ENTER key to select the tool.
 ARROW down to highlight the SPINDLE field.
 Press the Forward soft key.
 ARROW down to enter the selection, and move to the RPM field.
 Enter 1300 (e.g. example) using the numeric keypad, and ARROW
down to the REQUIRE CHANGE field.
 Press the Yes soft key.
 Press the USE key.
A new tool has now been added to the program, and the previous tool
will need to be changed when running the program. The program,
when running, will stop at this point, and request the tool change
before continuing.