ACU-RITE MILLPWRG2 - Manual (Page 74)

56 5 Program Overview
5.1 Pr
ogr
amming Intr
oduction
 From Folder View, press the Folder View soft key to
exit back to the Program Functions display.
 Press the Exit soft key to exit back to Program Mode.
Program Drawing View
While a program is running (or being created), individual steps being
performed are graphically shown as they are being ran or created.
Pressing the VIEW hard key displays different soft keys for viewing
choices of the program. The VIEW key acts as a toggle switch, pressing
it again will remove the view soft keys and return to the previous
display. Pressing CANCEL or USE will also exit the view soft keys.
 To activate the bottom menu soft keys for viewing
choices, press the VIEW key. The view soft keys are
explained on page 62.
 To return to the previous display, press the VIEW key
again, or the USE key.
 If the CANCEL key is pressed, it will exit out of the view
mode, and return to the previous display, but will not
cancel out any view changes made.
Soft keys that have a small arrow in the upper left hand
corner indicates that a popup menu is available when the
key is selected for additional choices.