ACU-RITE MILLPWRG2 - Manual (Page 125)

ACU-RITE MILLPWR G2 107
6.2 F
o
lders
Backing Up a Program
To back up a program is similar to saving a program. A backup
program can be saved to another location (e.g. memory device, or on
a network), or to the same program location. If it is saved to the same
program location, then it can be with the same name plus an indication
in the name that it is a backup copy. The MILLPWR
G2
Copy and Paste
functions do this automatically, and is further explained below.
In the same manner, this can also apply to backing up a G-code
program.
It is also possible to select all programs in a folder and be saved as a
backup to the same folder.
Copy and Paste programs
 Press the Program Functions soft key.
 Press the Change Window soft key to select the Folder
Tree. Repeat to select the Folder Contents window.