ACU-RITE MILLPWRG2 - Manual (Page 76)

58 5 Program Overview
5.1 Pr
ogr
amming Intr
oduction
Program Mode Soft Keys
When the DRO/PGM key is selected from DRO mode, the MILLPWR
G2
screen changes to PGM mode, and the program default screen is
displayed.
When the MILLPWR G2 is set to program mode, types of
milling functions specific to the hard key selected become
available as soft keys.
Keys Function
Program Functions opens additional soft keys to
Load, Save, Clear, or Copy a program along with
several other functions listed on the following page.
Step Functions opens additional soft keys for
modifying the program steps (e.g. reverse path,
delete steps, ect.).
Program Steps opens additional soft keys for
programming, or modifying an existing program by
adding addition milling functions (e.g. add a pocket,
mill a circle, etc.).
Clear Program will unload the current program when
the Yes soft key is selected. The program is not
saved. If any changes were made, they are lost.
Shutdown will shut down the MILLPWR
G2
system.
Only then can power be turned off.
Save/Discard opens a popup menu which provides
the choice to either save the changes made to the
program, or discard the changes by returning the
program to its original state.
Run Options opens additional soft keys for running a
program (e.g. dry run, graphics only, etc.).
Once Clear Program is used the program cannot be
recovered.