Toshiba Gigashot A Series - Manual (Page 98)

76 Owner’s Manual
Hard Disk Camera GSC-A100FE/GSC-A40FE
x.v.Color
This function can be used to allow videos shot on this camera to be played
on video equipment that supports the “x.v.Color” standard. (
p.156)
1. From the recording menu ( p.34), select [x.v.Color].
Use the jog dial to select [x.v.Color] and then press the OK ( ) button.
2. Select [ON].
Use the jog dial to select [ON] and then press the OK ( ) button.
ON:
x.v.Color is enabled.
OFF: x.v.Color is disabled.
Raising the ISO Sensitivity
This is an effective way to increase the camera’s sensitivity when you are
shooting.
When you are shooting in dark locations or anywhere flash use is
forbidden, it is a good idea to increase the sensitivity.
1. From the recording menu ( p.34), select [RAISE SENSITIVITY].
Use the jog dial to select [RAISE SENSITIVITY] and then press the OK
( ) button.
RECORDING MENU
CONTINUOUS RECORDING
OFF
RAISE SENSITIVITY
WHITE BALANCE
EXIT
IMAGE STABILIZATION
ON
RECORDING MENU
CANCEL
x.v.Color
MEMO
Setting the camera to auto mode selects [OFF] as the x.v.Color setting.
ATTENTION
Shooting at higher sensitivities may increase the amount of noise in
your images.
RECORDING MENU
WHITE BALANCE
OFF
IMAGE STABILIZATION
EXIT
WIND NOISE REDUCTION
RAISE SENSITIVITY