Toshiba Gigashot A Series - Manual (Page 116)

94 Owner’s Manual
Hard Disk Camera GSC-A100FE/GSC-A40FE
Protecting Images
To prevent images from being inadvertently erased ( p.40), you can
make them read-only files. This is referred to as “protection”.
Protecting Individual Images
1. From the play menu ( p.35), select [PROTECT].
Use the jog dial to select [PROTECT] and then press the OK ( )
button.
2. Select [1 IMAGE].
Use the jog dial to select [1 IMAGE] and then press the OK ( ) button.
3. Select the desired drive.
Move the OK ( ) button up or down to select the drive where the
image to be protected is located and then press the OK ( ) button.
4. Display the image to be protected.
Use the jog dial to select the image you want to protect.
The protection icon
is displayed on images that are already
protected.
ATTENTION
Formatting ( p.156) erases all images, including protected images.
Erased images cannot be restored.
PLAY MENU
PROTECT
COPY
CONTINUOUS VIDEO PLAYBACK
EXIT
ERASE
PLAY MENU
PROTECT
CANCEL
1 IMAGE
PLAY MENU
PROTECT
1 IMAGE
HDD
SD CARD
CANCEL
PROTECT THIS IMAGE?
YES
NO
EXIT