Troubleshooting – Toshiba Gigashot A Series User Manual
Page 166
144
Owner’s Manual
Hard Disk Camera GSC-A100FE/GSC-A40FE
Troubleshooting
If an error or fault occurs, first check the error message displayed on the
screen (
p.154) and the status of the LEDs (
p.3). Then refer to the
information given below.
Problem
Cause
Solution
Page
Power, Preparation
I can’t charge
the battery.
The AC adapter is not
connected.
Connect the AC adapter. 5
The camera is turned
on.
Turn the camera off.
The camera or battery
is overheated.
Allow the camera or
battery to cool fully
before charging.
The camera or battery
is too cold.
Warm the camera or
battery before charging.
The camera
won’t turn on.
The AC adapter is not
connected.
Connect the AC adapter. 5
The battery is out of
charge.
Charge the battery.
The battery has
reached the end of its
service life.
Replace it with a new
battery.
The camera
runs out of
power too
quickly.
The battery is out of
charge.
Charge the battery.
You are using the
camera in very cold
conditions.
Keep the battery in a
warm place (such as
your pocket) and only
load it when you are
about to shoot.
The terminals are
soiled.
Wipe the battery
terminals and the
terminals in the camera
with a clean, dry cloth.
The battery has
reached the end of its
service life.
Replace it with a new
battery.
The camera
suddenly lost
power.
The auto power off
function was activated.
Turn the camera back
on.
Change the auto power
off settings.