Toshiba Gigashot A Series - Manual (Page 105)

Owner’s Manual 83
Hard Disk Camera GSC-A100FE/GSC-A40FE
Turning Off the Auto Guide Lamp
Use this setting to turn off the lamp that tells you when the camera is in auto
mode.
1. From the recording menu (
p.34), select [AUTO GUIDE LAMP].
Use the jog dial to select [AUTO GUIDE LAMP] and then press the OK
( ) button.
2. Select [OFF].
Use the jog dial to select [OFF] and then press the OK ( ) button.
Changing the LCD Brightness
This feature allows you to adjust the LCD brightness to suit the conditions
you are shooting in. Making the LCD brighter makes it easier to see when
you are outdoors or in other brightly lit situations.
ON: The auto guide lamp lights when the camera is in auto mode.
OFF: The auto guide lamp does not light when the camera is in auto
mode.
RECORDING MENU
METERING MODE
ON
LCD BRIGHTNESS
EXIT
SETUP
AUTO GUIDE LAMP
AF ASSIST LIGHT
ON
RECORDING MENU
CANCEL
AUTO GUIDE LAMP
MEMO
The still auto guide lamp setting is retained even if you switch to auto
mode. You can also change this setting.
ATTENTION
If you reduce the LCD brightness and then move to a bright location,
there may appear to be no image on the LCD monitor.