Toshiba Gigashot A Series - Manual (Page 46)

24 Owner’s Manual
Hard Disk Camera GSC-A100FE/GSC-A40FE
Shooting Video
Preparation
Check that the battery is loaded in the camera and turn the camera on.
Use the grip belt to avoid dropping the camera (
p.22).
1. Select recording mode.
Slide the mode switch in the direction of the arrow to select recording
mode.
2. Start video recording.
Press the REC button to begin recording.
The front LED lights during video recording.
3. End video recording.
While shooting a video, press the REC
button to end video recording
and save the video as a file.
IMPORTANT
Do not disconnect the AC adapter or remove the battery or SD card
while the camera is in operation, particularly after shooting when
images are being saved. Doing so may damage the camera, hard disk
drive and/or SD card, and may corrupt the data stored on the hard disk
drive or SD card.
Avoid low temperature-burns when using the camera for long periods of
time. The camera can get hot, especially when used in hot
environments. For long periods of shooting, the use of a tripod is
recommended.
Shooting directly into the sun may cause camera faults.
Elapsed shooting
time