Toshiba Gigashot A Series - Manual (Page 144)

122 Owner’s Manual
Hard Disk Camera GSC-A100FE/GSC-A40FE
Resetting the System
This option returns the camera settings to the values specified at the time
of purchase (factory defaults). Note that this does not reset the settings for
save to, language or date and time setting.
1. From the setup menu (
p.36), select [SYSTEM].
Use the jog dial to select [SYSTEM] and then press the OK ( ) button.
2. Select [RESET].
Use the jog dial to select [RESET] and then press the OK ( ) button.
3. Select [OK].
Move the OK ( ) button left to select [OK] and then press the OK ( )
button.
MEMO
If the camera detects that it has been dropped and stops access to the
hard disk drive, the “HARD DISK DRIVE CANNOT BE ACCESSED”
message appears. Turn the camera off and then on again.
Sudden camera movements during filming or while you are riding in a
vehicle can trigger the sensor and stop the camera shooting.
SETUP
SYSTEM
SOUND
EXIT
DATE AND TIME SETTING
RESET
SETUP
SYSTEM
RETURN
RESET
RESTORE CAMERA
SETTINGS TO
THEIR DEFAULTS.
CANCEL
OK CANCEL
OK