Toshiba Gigashot A Series - Manual (Page 28)

6 Owner’s Manual
Hard Disk Camera GSC-A100FE/GSC-A40FE
The STATUS LED changes as shown below as the battery charges.
When charging is completed, disconnect the camera from the AC
adapter.
Battery Level Display
When you turn the camera on, the level of charge in the battery appears on
the LCD monitor.
Lit red: Charging
Lit green: Charging completed
Blinking red: Charging error
IMPORTANT
If a charging error occurs, first unplug the power cord from the mains
power socket. Once the battery has cooled down, remove it from the
camera and contact the Toshiba Support.
Charge the battery in the camera or in the optional charger. Never
attempt to charge the battery with another charger. Visit the Toshiba
website for information on the optional charger.
computers.toshiba-europe.com
MEMO
To get the best possible performance from your battery, charge it when
the ambient temperature is between 50°F (10°C) and 86°F (30°C).
This battery does not need to be fully discharged or exhausted before
being charged.
The battery may feel warm after it has been charged or immediately
after being used. This is normal and not a malfunction.
Do not recharge a fully charged battery.
Display Meaning
Fully charged
Low charge
Almost out of charge
Running on the AC adapter