Toshiba Gigashot A Series - Manual (Page 79)

Owner’s Manual 57
Hard Disk Camera GSC-A100FE/GSC-A40FE
* Default setting if the scene is changed.
Setting Wide-angle Zoom
Selecting [STAGE] as the scene setting allows you to specify the widest
available wide-angle setting so that the camera cannot be zoomed out any
further.
This is ideal for shooting on-stage performances, such as school plays,
from a seat in the audience.
1. Select [STAGE] in the scene settings.
2. Select [CREATE NEW].
Move the OK ( ) button down to select [CREATE NEW] and then
press the OK ( ) button.
Select [USE EXISTING DATA] to load settings stored previously.
SUNSET For evening or sunset
shots
SUPPRESSED FLASH
STAGE For shots of a fixed area,
such as a concert stage
SUPPRESSED FLASH
Scene Type of shot Available flash modes
MEMO
You cannot specify scene settings while shooting video.
The explanations for the different scenes are only intended as a
general guide. Select the scene setting that works best for you.
You can restrict zoom operation to a specified wide-angle setting by
selecting [STAGE] in the scene setting (
p.57).
Setting the camera to Auto mode selects [AUTO] as the scene setting.
When you zoom
out...
Zoom in for a close-up on the
performers.
Zooming stops at the specified
position.
STAGE
OK OK CANCEL CANCEL OK CANCEL
USE EXISTING DATA USE EXISTING DATA
CREATE NEW CREATE NEW
USE EXISTING DATA
CREATE NEW