Using a conversion lens – Toshiba Gigashot A Series User Manual
Page 87

Owner’s Manual
65
Hard Disk Camera GSC-A100FE/GSC-A40FE
Using a Conversion Lens
A conversion lens (sold separately) mounted on the front of the lens
narrows or broadens the field of view. Use conversion lenses for more
distant or more wide-angle shooting.
1. Mount a conversion lens.
Mount the conversion lens by rotating it in the direction of the arrow.
With a telephoto conversion lens
mounted...
With a wide-angle conversion
lens mounted...
MEMO
Visit the Toshiba website for information on optional conversion lenses.
computers.toshiba-europe.com
The lens filter diameter is 43 mm. Any third-party conversion lens with
the same filter diameter can be used.
Note the information below when mounting a conversion lens on the
camera. You should also remove the conversion lens in certain
circumstances.
Conversion lenses obstruct the light from the flash (
p.59) and AF
assist light (
p.82) so that they are ineffective.
The remote control (
p.18) may not operate correctly.
Set [IMAGE STABILIZATION] (
p.77) to [OFF].
The camera may have difficulty auto focusing or the distances
displayed for the shooting range (
p.xii) and manual focus may be
incorrect.
At some zoom settings, the corners of the image may darken or the
conversion lens itself may appear in the image.