Toshiba Gigashot A Series - Manual (Page 34)

12 Owner’s Manual
Hard Disk Camera GSC-A100FE/GSC-A40FE
Write-protection
To prevent important data from being accidentally erased, you can lock
(write-protect) an SD card by moving the write-protect tab on the side of the
card to the LOCK position. To record, edit or erase data on the card, return
the tab to the unlocked position.
Turning the Camera On and Off
Preparation
Load the battery ( p.5) or connect the AC adapter ( p.5).
Turning the Camera On and Off by Opening and Closing the
LCD Monitor
LOCK LOCK
Write-protect tab
Locked
IMPORTANT
Not all third-party SD cards are guaranteed to work with this camera.
Opening and closing the LCD monitor turns the
camera on and off.
Open the LCD monitor: Turns the camera on.
Close the LCD monitor: Turns the camera off.
If the date and time are not set, the screen for setting
the date and time appears when you turn the camera
on. ( p.13)
MEMO
If [LCD-LINKED POWER] ( p.114) is set to [OFF], opening and
closing the LCD monitor does not turn the camera on and off. Slide the
POWER switch to turn the camera on and off.
Use the mode LED to check whether the camera is turned on when the
LCD monitor is closed.
You can start the camera up more quickly by setting [QUICK START]
(
p.115) to [ON].