Toshiba Gigashot A Series - Manual (Page 63)

Owner’s Manual 41
Hard Disk Camera GSC-A100FE/GSC-A40FE
5. Select [YES].
Move the OK ( ) button up or down to select [YES] and then press the
OK ( ) button.
The image is erased and the previous image appears.
If you select [NO], the previous image appears without the displayed image
being erased.
Selecting [EXIT] returns you to the play menu.
Erasing Multiple Images
This section explains how to erase multiple images at once. Note that you
cannot erase protected images (
p.94) or images on a locked SD card
( p.12).
Image Selection Screen
The image selection screen is divided into 3 areas.
You can move between areas by moving the OK ( ) button left or right.
Six images are displayed on the screen. If there are more than six images,
the remaining images are displayed on subsequent pages.
Inside each of the areas, use the jog dial or move the OK ( ) button up
and down to select an item.
THIS IMAGE
IS NOT BACKED UP.
ERASE THIS IMAGE?
YES
NO
EXIT
ATTENTION
Erased images cannot be recovered.