Toshiba Gigashot A Series - Manual (Page 97)

Owner’s Manual 75
Hard Disk Camera GSC-A100FE/GSC-A40FE
Matching the White Balance Manually
Use this procedure to store preset data for the current light source.
1. Select [PRESET] from the white balance options.
Move the OK ( ) button left or right to select [PRESET] and then press
the OK ( ) button.
2. Select [MATCH WHITE BALANCE].
Move the OK ( ) button up or down to select [MATCH WHITE
BALANCE] and then press the OK ( ) button.
Select [USE EXISTING DATA] to use preset data that you have already
stored.
3. Match the white balance.
Position a white object (a white plate or white paper) so that it fills the
frame in the center of the screen and then press the OK ( ) button.
WHITE BALANCE
PRESET
OK OK CANCEL CANCEL OK CANCEL
WHITE BALANCE
OK OK CANCEL CANCEL OK CANCEL
MATCH WHITE BALANCE MATCH WHITE BALANCE
USE EXISTING DATA USE EXISTING DATA
MATCH WHITE BALANCE
USE EXISTING DATA
WHITE BALANCE
DISPLAY A WHITE OBJECT DISPLAY A WHITE OBJECT
IN THE CENTER, THEN IN THE CENTER, THEN
PRESS THE OK BUTTON. PRESS THE OK BUTTON.
DISPLAY A WHITE OBJECT
IN THE CENTER, THEN
PRESS THE OK BUTTON.
MEMO
When you are matching the white balance, try to ensure that the white
object completely fills the frame in the center of the screen.