Before you shoot, P.22), Adjusting the grip belt holding the camera – Toshiba Gigashot A Series User Manual
Page 44

22
Owner’s Manual
Hard Disk Camera GSC-A100FE/GSC-A40FE
Before You Shoot
Adjusting the Grip Belt
Holding the Camera
When shooting, hold the camera firmly, taking care not to block the lens or
flash with your fingers.
When moving the camera while shooting a video, avoid sudden or extreme
movements.
For example, when you are panning the camera left or right, lock your
wrists so that camera does not move up and down and slowly turn your
body as you shoot.
When holding the camera one-handed, brace your elbow firmly against the
side of your body.
For a more stable grip, hold the LCD monitor with your left hand.
Take care not to block the lens or flash with your fingers.
You can adjust the grip belt to ensure that you
maintain a firm grip on the camera.
Release the Velcro tape on the grip belt and,
holding the camera in your right hand, adjust
the belt length so that your thumb is over the
REC
button and your forefinger is over the
zoom lever.
After adjusting the length, refasten the Velcro
tape firmly.
Correct (one-handed)
Correct (two-handed)
Incorrect