Toshiba Gigashot A Series User Manual
Page 168
146
Owner’s Manual
Hard Disk Camera GSC-A100FE/GSC-A40FE
Resetting
does not
restore some
settings.
Resetting does not
restore the default
settings for save to,
language or date and
time setting.
None of the
buttons work.
A system error has
occurred.
Slide the POWER switch
across and hold it in
place for at least 5
seconds. Note that this
may result in the loss of
any files that are being
created. Settings such
as the date and time
may also revert to their
default values.
Operation is
slow.
Too many images are
stored on the hard disk
drive.
Erase some images.
Move some images to a
PC or DVD, etc.
The remote
control does
not work.
The remote control
battery is not loaded in
the correct direction.
Load the battery
correctly.
The battery in the
remote control is flat.
Fit a new battery.
You are outside the
effective range.
Use the remote control
at a distance of up to
around 12 feet (4
meters) and at an angle
of up to roughly 25° up,
down, left or right of the
camera.
There is a strong light
shining on the remote
control sensor.
Avoid shining strong
light directly at the
remote control sensor.
Recording
I can’t select
some of flash
settings.
The scene setting is
not [AUTO].
In scene settings other
than [AUTO], flash use
is restricted.
Continuous recording
is set to
[CONTINUOUS
RECORDING].
Select the [1 SHOT]
continuous recording
setting.
Problem
Cause
Solution
Page