beautypg.com

AMD Geode SC1201 User Manual

Page 221

background image

AMD Geode™ SC1200/SC1201 Processor Data Book

221

Core Logic Module - Bridge, GPIO, and LPC Registers - Function 0

32579B

4

User Defined Device Idle Timer 1 (UDEF1) SMI Status. Indicates whether or not an SMI was caused by expiration of User
Defined Device 1 (UDEF1) Idle Timer Count Register (F0 Index A0h).

0: No.

1: Yes.

To enable SMI generation, set F0 Index 81h[4] = 1.

3

Keyboard/Mouse Idle Timer SMI Status. Indicates whether or not an SMI was caused by expiration of Keyboard/ Mouse
Idle Timer Count Register (F0 Index 9Eh).

0: No.

1: Yes.

To enable SMI generation, set F0 Index 81h[3] = 1.

2

Parallel/Serial Idle Timer SMI Status. Indicates whether or not an SMI was caused by expiration of Parallel/Serial Port Idle
Timer Count Register (F0 Index 9Ch).

0: No.

1: Yes.

To enable SMI generation, set F0 Index 81h[2] = 1.

1

Floppy Disk Idle Timer SMI Status. Indicates whether or not an SMI was caused by expiration of Floppy Disk Idle Timer
Count Register (F0 Index 9Ah).

0: No.

1: Yes.

To enable SMI generation, set F0 Index 81h[1] = 1.

0

Hard Disk Idle Timer SMI Status. Indicates whether or not an SMI was caused by expiration of Hard Disk Idle Timer Count
Register (F0 Index 98h).

0: No.

1: Yes.

To enable SMI generation, set F0 Index 81h[0] = 1.

Index F6h

Second Level PME/SMI Status Register 3 (RC)

Reset Value: 00h

The bits in this register contain second level status reporting. Top level status is reported in F1BAR0+I/O Offset 00h/02h[0].

Reading this register clears the status at both the second and top levels.

A read-only “Mirror” version of this register exists at F0 Index 86h. If the value of the register must be read without clearing the SMI
source (and consequently de-asserting SMI), F0 Index 86h can be read instead.

7

Video Access Trap SMI Status. Indicates whether or not an SMI was caused by a trapped I/O access to the Video I/O Trap.

0: No.

1: Yes.

To enable SMI generation, set F0 Index 82h[7] = 1.

6

Reserved. Reads as 0.

5

Secondary Hard Disk Access Trap SMI Status. Indicates whether or not an SMI was caused by a trapped I/O access to
the secondary hard disk.

0: No.

1: Yes.

To enable SMI generation, set F0 Index 83h[6] = 1.

4

Secondary Hard Disk Idle Timer SMI Status. Indicates whether or not an SMI was caused by expiration of Secondary
Hard Disk Idle Timer Count register (F0 Index ACh).

0: No.

1: Yes.

To enable SMI generation, set F0 Index 83h[7] = 1.

Table 6-29. F0: PCI Header/Bridge Configuration Registers for GPIO and LPC Support (Continued)

Bit

Description

This manual is related to the following products: