Xerox WorkCentre C2424-3833 - Manual (Page 53)

Adjusting Copying Options
WorkCentre® C2424 Copier-Printer
3-8
Image Adjustments
This section includes:
■ "Setting the Original Size" on page 3-8
■ "Reducing or Enlarging the Image" on page 3-8
■ "Lightening or Darkening the Image" on page 3-9
■ "Adjusting the Contrast of the Image" on page 3-9
■ "Automatically Suppressing Background Variations" on page 3-9
■ "Adjusting the Color Balance" on page 3-10
■ “Erasing the Edges of Copy Documents” on page 3-10
Setting the Original Size
You can specify the size of the original so that the correct area is copied. To do this:
1. On the control panel, press the Copy button.
2. In the menu, select Original Size , then press the Enter button.
Note
You can press the Original Size shortcut button on the control panel to skip Steps 1
and 2.
3. Select one of the preset sizes or Tray/Auto (the factory default), then press the Enter
button.
■ For copies from the document glass, Tray/Auto works with the Book Copy, Auto
Reduce/Enlarge, Poster 4x4, Edge Erase, and Auto Center options to pre-scan each
original to determine its size. Otherwise, the copy area is the same size as the copy
paper.
■ For copies from the document feeder, Tray/Auto sets the copied area to the same size
as the copy paper.
Reducing or Enlarging the Image
You can reduce the image down to 25% of its original size or enlarge it up to 400% of its
original size. If desired, the images can be enlarged and printed on sixteen pages so you can
assemble them into a poster.
To reduce or enlarge the image:
1. On the control panel, press the Copy button.
2. In the menu, select Reduce/Enlarge , then press the Enter button.
Note
You can press the Reduce/Enlarge shortcut button on the control panel to skip Steps 1
and 2.