Xerox WorkCentre C2424-3833 - Manual (Page 123)

Specialty Paper
WorkCentre® C2424 Copier-Printer
5-38
2. If necessary, adjust the length and side paper guides to match the size of the paper.
■ Press the sides of the length guide, then slide the guide until the arrow on the guide
matches the appropriate paper size and clicks into place.
■ Slide the side guides until the arrows on the guides match the appropriate paper size
and the guides click into place.
Note
When the paper guides are adjusted correctly, there may be a small space between the
paper and the guides.
3. Insert the paper into the tray.
■ Single-sided printing: Insert the side to be printed faceup with the top of the page
toward the front of the tray.
■ 2-sided printing: Insert side one facedown with the top of the page toward the back
of the tray.
Note
Do not load paper above the fill line inside the tray.
2424-094
2424-097