Xerox WorkCentre C2424-3833 - Manual (Page 219)

Output Quality Problems
WorkCentre® C2424 Copier-Printer
7-26
Output Quality Problems
Your system is designed to produce consistently high-quality color copies, prints, and scanned
images. If you observe print-quality problems, use the information in this section to
troubleshoot the problems.
■ "Solving Print-Quality Problems" on page 7-27
■ "Diagnosing Copy-Quality Problems" on page 7-29
■ "Solving Scan-Quality Problems" on page 7-29
Some settings directly control the quality of your prints and copies.
■ For print jobs, select the desired print-quality mode and color correction in the printer
driver; see the “Advanced Options” section in the
Printing chapter of this guide.
■ For copy jobs, select the output quality and original type by pressing the Output Quality
button and Original Type button on the left side of the control panel; see the
Copying
chapter of this guide.
Caution
Damage caused by using unsupported paper, transparencies, and other specialty media is
not covered by the Xerox warranty, service agreement, or Total Satisfaction Guarantee.
The Total Satisfaction Guarantee is available in the United States and Canada. Coverage
may vary outside these areas; please contact your local representative for details.
For information on supported paper types and weights, see the “Supported Papers” section in
the
Loading Media chapter of this guide.
For more information, go to the infoSMART Knowledge Base at www.xerox.com/office/
c2424infoSMART .