Xerox WorkCentre C2424-3833 User Manual

Page 40

Loading Media in Tray 1

WorkCentre® C2424 Copier-Printer

2-11

Verify that the paper is pushed against the roller until it stops and verify that the side
guides are pressed against the paper.

When prompted at the control panel:

■

If the paper size and type are correct, press the Enter button.

■

If the paper size and type are not correct, select

Change

, press the Enter button,

select the paper size, press the Enter button, select the paper type, then press the
Enter button.

■

If you are using custom size paper, see the

Printing

chapter of this guide for

instructions on entering the

Custom Width

and the

Custom Height

of the paper.

Note

If the control panel does not show the paper size that you loaded, slide the paper
guides to fit against the paper, then repeat Step 5.

2424-041

This manual is related to the following products: