Xerox WorkCentre C2424-3833 - Manual (Page 128)

Specialty Paper
WorkCentre® C2424 Copier-Printer
5-43
Carbonless Paper
Xerox Carbonless Paper reams are pre-collated into sets of two or more sheets. The first sheet
of a set is white; the subsequent sheets are different colors.
■ Most carbonless paper reams are straight collated, with the first sheet of a set on top.
■ Reverse collated reams are stacked in the opposite order, with last sheet of a set on top.
You can print Xerox Carbonless Paper from any tray.
To order paper, transparencies, or other specialty media, contact your local reseller or go to
www.xerox.com/office/supplies .
Guidelines
■ Do not open sealed packages of carbonless paper until you are ready to load them.
■ Do not leave unused carbonless paper in the paper trays. Seal and store unused paper in the
original wrapper.
■ Xerox Carbonless Paper has an odor that differs from regular paper. This is normal and is
not harmful in any way.
■ Rotate stock frequently. For best results, use carbonless paper within one year from the
date of purchase.
■ The friction feed action of the paper tray may cause a slight scuff mark on the second or
subsequent sheets.
■ If you encounter a paper jam while running carbonless paper, maintain the integrity of the
pre-collated sets by:
a. Checking the color of the last printed sheet.
b. Discarding sheets from the input tray so that the next sheet to print is the correct color
sequence.
Printing Xerox Carbonless Paper from Tray 1
1. Find the label on the end of the paper ream package. The label contains an arrow pointing
to the top of the ream.
2. Open the package, and select the number of sets that you want to print. A set contains a
white sheet, followed by one or more colored sheets.
Note
It is important that the sheets be printed in the correct order. Do not change the order
of the sheets.