Xerox WorkCentre C2424-3833 User Manual
Page 126
Specialty Paper
WorkCentre® C2424 Copier-Printer
5-41
3.
On the control panel:
a.
Select
Change
, then press the Enter button.
b.
Select the paper size, then press the Enter button.
c.
Select
Special
for paper type, then press the Enter button to save your selection.
4.
In the printer driver, select Tray 1 as the paper source.
Printing Glossy Paper from Tray 2, 3, or 4
1.
Pull the tray completely out of the system.
2.
If necessary, adjust the length and side paper guides to match the size of the paper.
■
Press the sides of the length guide, then slide the guide until the arrow on the guide
matches the appropriate paper size and clicks into place.
■
Slide the side guides until the arrows on the guides match the appropriate paper size
and the guides click into place.
Note
When the paper guides are adjusted correctly, there may be a small space between the
paper and the guides.
2424-001
2424-094