Konica Minolta bizhub PRESS C7000 - Manual (Page 73)

Test–printing spot colors
Select and print spot colors from a spot color dictionary to check
how the spot colors look on the selected paper.
1. From the Tools menu, select Spot Color Editor.
2. Click Test Print.
3. Select one or more spot colors, or click All.
4. Click Print.
5. In the Tray list, select the desired tray.
6. In the Screening list, select the desired screening method.
7. In the Calibration list, select the calibration table.
8. Click Print.
The test print for the selected spot colors is printed.
Measuring a spot color with the X-Rite i1 spectrophotometer
Use the spectrophotometer to obtain spot color values from
printed material, fabric, and so on, and then save the equivalent
CMYK values in the custom color dictionary.
Requirements:
● Your spectrophotometer must be connected to the USB port on
the IC-307 print controller.
● Calibrate the spectrophotometer by placing it on its plate.
Test–printing spot colors 63