Konica Minolta bizhub PRESS C7000 - Manual (Page 62)

9. Click Create Profile.
The process of creating a profile may take a while.
10. In the Profile Name box, the Profiling Tool automatically
names the profile according to the media type and screening
method that you selected. To change the default name, type a
new name.
11. To save the destination profile, select one of the following
options:
○ Profile Manager—The profile will automatically appear in
the Profile Manager and in the job parameters window.
○ Other—Saves the profile to a specified location and later
you can import it to the Profile Manager.
12. Click Save to save the profile.
13. In the message that appears, click OK.
14. Click Finish to close the Profiling Tool.
Troubleshooting profiling
Resolve common troubleshooting problems that can occur during
the profiling process.
Problem Recovery action
Wrong
measured strip The data received for the measured strip does not
match the expected results for this strip. Make sure that
you are measuring the correct strip. Perform one of the
following actions:
● Click OK to measure the strip again.
● Click Cancel to continue the process.
Strip
measurement
failed. A red X
icon appears. Repeat the measurement.
Device not
connected Connect the external device.
Printer not
connected Connect the printer.
Measurement
failed Repeat the measurement.
Invalid
measurement
format loaded Make sure that you are loading the correct file format.
Wrong chart
measured Repeat the measurement with the correct chart.
52 Chapter 7—Managing color