Konica Minolta bizhub PRESS C7000 - Manual (Page 18)

USB port on the IC-307 print controller before you turn on the
monitor and printer.
1. Turn on the monitor.
2. Open the front panel of the IC-307 print controller, and push
the power control button.
The power indicator on the front panel lights up, and the
Windows operating system logon screen appears.
The IC-307 print controller splash screen appears, followed by the
workspace.
Notes:
● If the workspace does not automatically appear, open the application from
the Windows Start menu.
See also:
Preferences window on page 147
Turning off the IC-307 print controller
1. From the File menu in the workspace, select Exit.
Note: Alternatively, if you want to exit the Workspace only (and not shut
down the color server), select Exit Workspace. This is useful when you
make a change to the settings that requires you to close and open the
Workspace, for example, when changing the units from inches to mm.
To restart the Workspace, right-click on the color server icon in the
system tray and click Start.
A confirmation message appears.
2. Click Yes.
The IC-307 print controller software closes. This may take a
few minutes.
Note: If you move the cursor over the server icon on the taskbar, the
following tooltip appears: Color Server is Stopping. Please Wait.
3. Verify that the IC-307 print controller icon does not appear on
the taskbar.
4. From the Windows Start menu, select Shut Down, and click
OK.
5. After the IC-307 print controller has shut down, you can turn
off the press.
8 Chapter 1—Getting started