Konica Minolta bizhub PRESS C7000 - Manual (Page 110)

After creating tabs in your file, you can save the tab text attribute
settings and the tab locations and captions (text on the tab).
1. In the upper part of the Tabs Printing window, click Save.
2. In the Setting Name box, type a name for the tab settings.
3. Select the Include Tab location and Caption check box to
save the locations and text of the tabs that you created.
4. Click Save.
The setting is saved in the Saved Settings list.
Note: You can apply this saved setting to your file by selected this from the
Saved Settings list, and then click Apply.
Deleting saved tab settings
1. In the Storage area, right-click your unprocessed job, and
select Job Preview & Editor.
The job opens in Acrobat software.
2. From the Plug-Ins menu, select Tabs Printing.
The Tabs Printing window opens, displaying the Text
Attributes tab.
3. From the Saved Settings list, select the desired saved
settings.
4. Click Delete.
Working with near-line finishers
Near-line finisher overview
The IC-307 print controller supports two near-line finishers, Duplo
DC-645 and DSF-2000. Using the IC-307 print controller, you can
perform the following actions:
● Generate and print barcodes and registration marks for the
Duplo DC-645 finisher. The barcode and registration marks are
generated according to the job details that were programmed
on the finisher.
● Generate and print barcodes and corner marks for the
DSF-2000 finisher. The barcode and corner marks are printed
100 Chapter 8—Production workflows