Konica Minolta bizhub PRESS C7000 - Manual (Page 133)

Parameter Option Description
Gap Between
Sets
Note: This option is available only when the imposition
method is set to Saddle Stitch and the Sets per Sheet
option is defined.
Controls the gap between sets of saddle-stitch booklets
placed on one sheet.
Creep Creep
Note: Creep is only available when imposition is set to
Saddle stitch.
Creep is used to compensate for the physical shift of the
inner sheets of a saddle stitch booklet. Set the size of the
page shift from or towards the spine.
Provides the following options:
● Creep in
○ Auto—Automatically sets a value based on the
paper's weight.
○ Custom—Enables you to set a custom creep in
value.
● Creep out—Enables you to set a creep out value
(negative or positive value).
Quality tab in the job parameters window
Apply settings to improve the quality of image, graphics, and text
elements in your job.
Parameter Option Description
Image/graphics
quality Image quality Provides the following options:
● High—Improves the quality of low resolution images in
a job.
● Normal—Processes the image in the job according to
the standard resolution of the press.
Image quality is the ability to maintain the same detail and
smoothness at different degrees of enlargement. The
Image quality option is especially useful when your
PostScript file includes several images of differing quality—
for example, images that were scanned at different
resolutions, were rotated, or downloaded from the Internet.
Improve text/line
in Image Significantly improves the text and line quality in your job. In
some cases, images in the PDL file contain data that
belong to the text and graphics layer, such as screen
captures and high resolution rasterized text. The IC-307
print controller is able to identify such images and convert
them into text and graphics.
Quality tab in the job parameters window 123