Konica Minolta bizhub PRESS C7000 - Manual (Page 118)

Scanning a document on the 80 PPM press and
70/60 PPM press
If you don't want to use one of the default scan boxes, use the
Remote Scan Application to create a scan box.
1. On the press touch screen, touch the Scan button.
2. Touch the HDD button.
3. Touch the scan box to which you want to save your scanned
jobs.
4. Touch Scan Settings.
5. Using the touch screen keyboard, define the settings for your
scanned jobs—for example, paper size and resolution.
6. Under File Type, select the file format in which you want to
save the scanned jobs.
7. Position the original printout on the platen glass of the 80 PPM
press and 70/60 PPM press.
8. Press the Start button.
The 80 PPM press and 70/60 PPM press scans the document.
It is automatically saved on the IC-307 print controller in the
folder D:\Output\Scan Jobs\Public.
Saving scanned jobs to your computer
Requirements: The exact name of the IC-307 print controller to
which you want to connect
Scanned jobs are saved to the scan box that you create in the
IC-307 print controller storage. Depending on the scan box
settings, a copy of the scanned job is saved in a folder on the
IC-307 print controller. After you scan a job, you can also save it to
a different location.
1. Open the Remote Scan Application.
2. In the Server Name or IP box, type the name of the server
connected to the press that you used for scanning.
3. Click Connect.
The connect icon changes from red to green, indicating that
you are connected to the server.
4. In the ScanBox list, select the scan box that your scanned
jobs are in.
Note: If the selected scan box is password protected, you must type the
password before you can view the list of scanned jobs.
All jobs scanned to the selected scan box are displayed.
108 Chapter 9—Scanning documents